Amdump Only Creates Incremental Dumps in Holding Disk: Difference between revisions
No edit summary |
Paul.bijnens (talk | contribs) m (up link) |
||
| Line 14: | Line 14: | ||
means to save at least 30% of the holding disk space for degraded mode backups. | means to save at least 30% of the holding disk space for degraded mode backups. | ||
That will allow 70 percent of the space to be used by incrementals. | That will allow 70 percent of the space to be used by incrementals. | ||
---- | |||
See more [[amdump issues]]. | |||
Revision as of 23:23, 12 December 2005
--- This text was originally contributed to the AMANDA-FAQ-O-Matic by [email protected]. ---
Amanda is supposed to be able to redirect the dumps to a specified holding disk in case there is a problem with the tape or drive. This "problem" can be anything from there being no tape in the drive, to the cable became disconnected.
Additionally, in some cases, you just want to fail all dumps to a holding disk in order to flush them all at once in order to save tapes.
Normally AMANDA will only store incrementals on the holding disk, and full dumps will be skipped, as the default is to reserve 100% of the disk for degraded-mode, incremental backups. In order to allow full backups to be dumped to the holding disk, you must reduce the amount of space reserved for incrementals.
For example:
reserve 30
means to save at least 30% of the holding disk space for degraded mode backups. That will allow 70 percent of the space to be used by incrementals.
See more amdump issues.