amcheckdump — check the results of an Amanda dump


amcheckdump config [--timestamp|-t timestamp] [--verbose] [-o configoption...]


Amcheckdump verifies Amanda dump images by reading them from storage volume(s) and verifying that the images can be parsed by the appropriate application (if available). For example, a GNUTAR image is passed to GNU Tar for parsing, and any errors (e.g., corrupt or missing data) are noted.

The application runs on the most recent dump or, if --timestamp is specified, on the most recent dump with that timestamp. Note that the verification is local to the Amanda server; if the dump application is not available, or is configured differently on the server than on the client, then the verification will most likely fail.

If a changer is available, it is used to load the required tapes. Otherwise, the application interactively requests the tapes.

See the "CONFIGURATION OVERRIDE" section in amanda(8) for information on the -o option.


# check the most recent dump
amcheckdump MYCONFIG

# check a specific dump from back in '78
amcheckdump MYCONFIG --timestamp 19780615


amanda(8), amcheck(8)

The Amanda Wiki:


This manual page was written by Ian Turner (Zmanda, Inc.).