server (amidxtaped) client (amrecover)
<= FEATURES= # fe_amidxtaped_exchange_features
FEATURES= => # fe_amidxtaped_exchange_features
<= CONFIG= # fe_amidxtaped_config
<= LABEL= # fe_amidxtaped_label
<= FSF= # fe_amidxtaped_fsf
<= HEADER # fe_amidxtaped_header
<= DEVICE= # fe_amidxtaped_device
<= HOST= # fe_amidxtaped_host
<= DISK= # fe_amidxtaped_disk
<= DATESTAMP= # fe_amidxtaped_datestamp
<= END # ALWAYS
HEADER-SEND-SIZE size => # fe_amrecover_header_send_size
<= HEADER-READY # fe_amrecover_header_ready
header (size:data) => # fe_amidxtaped_header
<= HEADER-DONE # fe_amrecover_header_done
run application support command
STATE-SEND => # fe_amrecover_state_send
<= STATE-READY # fe_amrecover_state_ready
statefile (EOF:state) => # fe_amrecover_stream_state
<= STATE-DONE # fe_amrecover_state_done
USE-DAR (YES|NO) => # fe_amidxtaped_dar
<= USE-DAR (YES|NO) # fe_amidxtaped_dar
<= AVAIL-DATAPATH AMANDA # fe_amidxtaped_datapath
USE-DATAPATH => # fe_amidxtaped_datapath
<= DATAPATH-OK # fe_amidxtaped_datapath
DATA-SEND => # fe_amrecover_data_send
run application restore command
<= DATA-READY # fe_amrecover_data_ready
<= DAR x:y # fe_amidxtaped_dar and USE-DAR is YES
data (EOF:data) =>
<= DAR-DONE # fe_amidxtaped_dar and USE-DAR is YES
#<= DATA-DONE # fe_amrecover_data_done
FEEDME label => # fe_amrecover_FEEDME
<= OK # fe_amrecover_FEEDME
or
<= TAPE device # fe_amrecover_feedme_tape
MESSAGE message => # fe_amrecover_message
fe_amidxtaped_exchange_features
If amrecover send the 'FEATURES=' line to amidxtaped and amidxtaped send the 'FEATURES=' line to amrecover
fe_amidxtaped_config
If amrecover can send the "CONFIG=" line to amidxtaped
fe_amidxtaped_label
If amrecover can send the "LABEL=" line to amidxtaped
fe_amidxtaped_fsf
If amrecover can send the "FSF=" line to amidxtaped
It is the number of FSF to do to get the file we want on tape
fe_amidxtaped_header
If amrecover can send the "HEADER" line to amidxtaped
Which means amrecover expect to see a 32KB header block at the begining of the data stream
fe_amidxtaped_device
If amrecover can send the "DEVICE=" line to amidxtaped
fe_amidxtaped_host
If amrecover can send the "HOST=" line to amidxtaped
fe_amidxtaped_disk
If amrecover can send the "DISK=" line to amidxtaped
fe_amidxtaped_datestamp
If amrecover can send the "DATESTAMP=" line to amidxtaped
fe_amidxtaped_nargs
Older format
6
-h
-p
$DEVICE
$HOST
$DISK
$DATESTAMP
fe_recover_splits
If amidxtaped can interactact with amrecover
Must be set if fe_amrecover_FEEDME is set
fe_amrecover_FEEDME
if amrecover accept "FEEDME $label" message
fe_amidxtaped_options_hostname
Unused
fe_amidxtaped_options_features
Unused
fe_amidxtaped_options_auth
Unused
fe_amrecover_message
If amrecover accept "MESSAGE $msg" message
fe_amrecover_feedme_tape
If amrecover can reply with TAPE to FEEDME request
fe_amrecover_dle_in_header
fe_amidxtaped_datapath
If they exchange the datapath
fe_amrecover_origsize_in_header
If amrecover accept the origsize in the header
fe_amidxtaped_abort
If amrecover can send 'ABORT' on error
fe_amrecover_correct_disk_quoting
amidxtaped ignore the DISK= if this is not set
fe_amrecover_receive_unfiltered
If amrecover can receive compressed and/or encrypted backup stream
fe_amrecover_crc_in_header
If the 3 CRC (native, client, server) can be in the header
fe_amrecover_data_status
Unused
fe_amrecover_data_crc
Unused
fe_amrecover_storage_in_marshall
fe_amidxtaped_storage_in_marshall
marshall the LABEL with the storage
fe_amrecover_stream_state
If a STATE virtual stream is created
fe_amidxtaped_dar
enable the USE-DAR exchange
amidxtaped expect many "DAR x:y" followed by "DAR-DONE"
fe_amrecover_header_send_size
if amidxtaped can send "HEADER-SEND-SIZE size" to amrecover
fe_amrecover_header_ready
if amrecover can send "HEADER-READY" to amidxtaped
fe_amrecover_header_done
if amrecover can send "HEADER-DONE" to amidxtaped
fe_amrecover_state_send
if amidxtaped can send "STATE-SEND" to amrecover
fe_amrecover_state_ready
if amrecover can send "STATE-READY" to amidxtaped
fe_amrecover_state_done
if amrecover can send "STATE-DONE" to amidxtaped
fe_amrecover_data_send
if amidxtaped can send "DATA-SEND" to amrecover
fe_amrecover_data_ready
if amrecover can send "DATA-READY" to amidxtaped
fe_amrecover_data_done
if amrecover can send "DATA-DONE" to amidxtaped
This page was automatically generated Fri Dec 1 16:49:57 2017 from the Amanda source tree, and documents the most recent development version of Amanda. For documentation specific to the version of Amanda on your system, use the 'perldoc' command.