Not an amanda tape
--- This text was originally contributed to the AMANDA-FAQ-O-Matic by [email protected]. ---
Because Amanda requires you to label tapes before it uses them. Run `amlabel' in order to label a tape.
If, even after labeling a tape, `amcheck' still complains about it, make sure the regular expression specified in amanda.conf matches the label you have specified, and check whether you have configured non-rewinding tape devices for Amanda to use. For example, use /dev/nrst0 instead of /dev/rst0, /dev/rmt/0bn instead of /dev/rmt/0b, or some other system-dependent device name that contains an `n', instead of one that does not. The `n' stands for non-rewinding.
If you have labeled any tapes using the rewinding device configuration, you'll have to label them again.