Not an amanda tape

From wiki.zmanda.com
Revision as of 11:23, 1 May 2006 by Janitrix (talk | contribs) (rv - spam)
Jump to navigation Jump to search

--- This text was originally contributed to the AMANDA-FAQ-O-Matic by [email protected]. ---

Because Amanda requires you to label tapes before it uses them. Run `amlabel' in order to label a tape.

If, even after labeling a tape, `amcheck' still complains about it, make sure the regular expression specified in amanda.conf matches the label you have specified, and check whether you have configured non-rewinding tape devices for Amanda to use. For example, use /dev/nrst0 instead of /dev/rst0, /dev/rmt/0bn instead of /dev/rmt/0b, or some other system-dependent device name that contains an `n', instead of one that does not. The `n' stands for non-rewinding.

If you have labeled any tapes using the rewinding device configuration, you'll have to label them again.


I'm not convinced that using a rewinding tapedevice makes the tape label invalid. Anyone proof of this solution? On the other hand, a wrong blocksize (32 bytes instead of 32k bytes) can result in an invalid label. -- Paul.bijnens 11:36, 5 December 2005 (PST)

See more amcheck issues

Retrieved from ‘http://wiki.zmanda.com/index.php?title=Not_an_amanda_tape&oldid=2670’